NO vs NC | 5 PRACTICAL and IMPORTANT Points About Normally Closed and Normally Open Contacts

Please help us grow faster by donating over at ▶ https://ko-fi.com/upmation

Read the full blog post at ▶ https://upmation.com/no-and-nc/

We all know how normally closed and normally open sensors and contacts work and how they differ from each other.

But in real-world conditions when we are choosing the instrument switches or other types of discrete equipment for a process, we have to select which one should work with a Normally Open contact and which one should work with a Normally Closed contact.

So, in this video, we’ll answer these questions and investigate the real-world application examples of Normally Open and Normally Closed Contacts such as Contactors and relays, pushbuttons, instrument switches, and so on. We also will have a quick look at the NAMUR sensors at the end of this video.

===========================

✅ Please SUBSCRIBE to get notified about the new videos: https://bit.ly/32mlhu9

===========================

SECTIONS of this video:

0:00 important questions about NO and NC contacts
0:59 different types of discrete signals in the industry
1:27 NC and NO contacts application in a contactor (Example)
2:05 NC vs NO sensor (Example)
3:52 why normally closed contacts should be integrated into stop push buttons?
4:37 NAMUR switches instead of normal switches

===========================

▶ If you’ve missed our most recent videos, watch them here:

DCS vs PLC: 5 Important Differences between PLC and DCS
https://upmation.com/plc-vs-dcs/

What is a Directional Control Valve? (5/2 Solenoid Valve)
https://upmation.com/directional-control-valve/

How Pneumatic Control Valve Works?
https://upmation.com/control-valve/

===========================

▶ If you want to become a confident PLC programmer, don’t miss this free "Siemens PLC Training" course (This course will be continued):

Part 1: Up & Running with PLC Ladder Programming
https://upmation.com/plc-hardware-configuration/

Part 2: How to Write PLC Ladder Program?
https://upmation.com/ladder-logic-plc-programming/

Part 3: How to Simulate the PLC Program?
https://upmation.com/simulate-the-plc-program/

Part 4: Motor Start and Stop Ladder Logic PLC Program
https://upmation.com/plc-program/

===========================

FOLLOW US on other Social Media

👉 INSTAGRAM ▶ https://instagram.com/upmationdotcom

👉 TWITTER ▶ https://twitter.com/upmation

👉 FACEBOOK ▶ https://facebook.com/upmation

👉 LINKEDIN ▶ https://Linkedin.com/company/upmation

===========================

#NOvsNC #Upmation #AutomationEngineer